contoh: HP 2510-24 Switch (J9019B)
Ports
24 RJ-45 autosensing 10/100 ports(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Media Type: Auto-MDIX, Duplex: half or full
2 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC transceivers)
Memory and processor
Processor : MIPS 32 @ 264 MHz, 8 MB flash, packet buffer size: 384 KB, 64 MB SDRAM
Latency
100 Mb Latency: < 4.9 µs (64-byte packets)
1000 Mb Latency: < 2.6 µs (64-byte packets)
Throughput
up to 6.5 million pps (64-byte packets)
Management features
HP PCM+
HP PCM
command-line interface
Web browser
out-of-band management
Switching capacity
8.8 Gbps
Power and Operating requirements
Power consumption
20 W (maximum)
Input voltage
100-127/200-240 VAC
Operating temperature range
0 to 45°C
Operating humidity range
15 to 95% @ 104°F (40°C) (noncondensing)
Heat dissipation
68 BTU/hr (71.74 kJ/hr)
Dimension and weight
Minimum dimensions (W x D x H)
23.62 x 44.25 x 4.39 cm
Weight
2.22 kg (Fully loaded)
Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Connectivity
10/100 and 10/100/1000 connectivity: provides customers with the choice of selecting the network connectivity speed that best meets their needs, with a consistent user experience
Gigabit uplinks: E2510-24 and E2510-48 switches: the E2510-24 switch has two dual-personality ports for either 10/100/1000 or mini-GBIC connectivity; the E2510-48 switch has four Gigabit Ethernet ports, which can all be used concurrently with two 10/100/1000 ports and two open mini-GBIC slots. E2510G-24 and E2510G-48 switches: four dual-personality ports for 10/100/1000 or SFP ports for optional fiber connectivity such as Gigabit-SX, -LX, and -LH, or 100-FX.
HP Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 copper ports
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP trunking: - E2510-24 switch supports up to two 10/100 trunks each with four links/ports plus one Gigabit Ethernet trunk. - E2510-48 switch supports up to 24 trunks with eight links/ports per trunk. - E2510-24G & E2510-48G switches support up to 24 trunks with eight links/ports per trunk.
Manageability
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): provides automated device discovery protocol for easy mapping by network management applications
RMON: provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI)
Web interface: allows configuration of the switch from any Web browser on the network
Single IP Address Management: provides single IP address management for a virtual stack of up to 16 switches
2. Switch Layer 3
contoh: HP 1910-24G-PoE (365W) Switch (JE007A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 PoE ports(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination
Memory and processor
Module : ARM @ 333 MHz, 128 MB flash, packet buffer size: 512 KB, 128 MB RAM
Latency
100 Mb Latency: < 5 µs
1000 Mb Latency: < 5 µs
Throughput
up to 41.7 million pps
Routing/switching capacity
56 Gbps
Management features
IMC - Intelligent Management Center
limited command-line interface
Web browser
SNMP Manager
IEEE 802.3 Ethernet MIB
PoE capability
365 W
Power and operating requirements
Power consumption
523 W (maximum)
Input voltage
100-240 VAC
Operating temperature range
0 to 45°C
Operating humidity range
10 to 90% (noncondensing)
Dimensions and weight
Minimum dimensions (W x D x H)
42.01 x 44.2 x 4.32 cm
Weight
3.08 kg
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Traffic prioritization: Provide time senstive packets priority based on DSCP or 802.1p classification. Packets will be mapped to four hardware queues for optimum throughput.
Management
Simple Web management: intuitive Web GUI (http/https) allows for easy management of device by even nontechnical users
Single IP management: enables management of up to 32 HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: devices can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Connectivity
Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Non-shared SFP ports: four true SFP mini-GBIC ports provide optional fiber connectivity such as Gigabit-SX and -LX; also supports SFP 1G RJ-45 copper connections
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: PWR models can provide up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more
Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds
Performance
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Selectable queue configurations: allow you to increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications
IGMP snooping: multicast filtering improves network performance, instead of flooding traffic to all ports
Fiber uplink: provides greater distance connectivity using Gigabit fiber uplinks
sumber: www8.hp.com
No comments:
Post a Comment